Energy Efficient Industrial Grade Distribution Transformer, 160kVA 11kv 0.4kV Oil Immersed Type Compliant IEC60076 for African Regional Power Supply Project
HENTG POWER 160kVA 11kV/0.4kV หม้อแปลงแช่น้ำมัน 3 เฟส ได้รับการรับรอง IEC60076 ถังปิดผนึกอย่างแน่นหนาช่วยป้องกันฝุ่นและความชื้นไม่ให้เข้าไป มาตรฐานการม้วนอลูมิเนียม (ตัวเลือกทองแดง) โอนัน คูลลิ่ง. เหมาะสำหรับโครงการสาธารณูปโภคเชิงพาณิชย์และไฟฟ้าในชนบท
IEC60076 Industrial Grade Distribution Transformer
,0.4kV Oil Immersed Distribution Transformer
,11kV 160kVA Distribution Transformer
The HENTG POWER 160kVA 11kV/0.4kV three-phase oil-immersed distribution transformer is a step-down unit designed for utility grids, commercial projects, and rural electrification. ONAN cooled, IEC 60076 compliant. Hermetically sealed corrugated tank eliminates breather and conservator, preventing dust and moisture ingress. Suitable for ambient temperatures up to 45°C (upgradeable to 50°C).
- IEC 60076 Certified – Full routine tests included. Acceptable for African utility tenders and EPC projects.
- Hermetically Sealed – No Breather – Zero dust or moisture ingress. Eliminates silica gel replacement and oil top-up.
- Low Loss CRGO Core – Reduces no-load and load losses, lowering lifetime operating costs.
- Aluminum Winding – Budget Friendly – 30–50% material cost saving vs copper. Same rated performance through optimized conductor sizing.
| Parameter | Value |
|---|---|
| Capacity | 160 kVA |
| Primary/Secondary | 11kV / 400V (230V phase-neutral) |
| Vector Group | Dyn11 (standard) |
| Cooling | ONAN |
| Tapping | ±2×2.5% (5 positions, off-circuit) |
| No-Load Loss | ≤290 W |
| Load Loss (75°C) | ≤2,200 W |
| Impedance | 4.0% |
| Core | CRGO silicon steel |
| Winding | Aluminum (copper optional) |
| Tank | Corrugated, fully welded, hermetically sealed |
| Oil | IEC 60296 inhibited mineral oil |
| Standard | IEC 60076 |
Included accessories: Pressure relief device, oil temp gauge, Buchholz relay, oil level sight gauge, drain valve with sampling port.
Problem: Sand, dust, high temperature (40°C+), and thermal cycling cause oil leaks, breather blockage, and insulation failure.
Our Solutions:
- Hermetically sealed welded tank – No breather, no conservator. Corrugated walls flex to absorb oil expansion/contraction. Eliminates the main dust entry path.
- Groove-retained NBR gaskets – Prevent extrusion under thermal stress. Multi-bolt pattern maintains compression during transport.
- 100% pressure leak testing – Each tank tested at 1.5× operating pressure before oil filling.
- Multi-layer coating – Epoxy zinc primer + polyurethane topcoat resists UV, corrosion, and sand scouring.
- Optional Class B/F insulation – For sustained 45–50°C ambient temperatures.
- Low maintenance – No breather servicing, no routine oil top-up. Annual visual inspection + DGA every 2–3 years.
-
Q1: Is the 11kV transformer compatible with 10.5kV or 10kV networks?
A: Yes. The off-circuit tap changer (±2×2.5%, 5 positions) allows field adjustment to 10kV, 10.5kV, or 11kV without unit replacement.
-
Q2: How does aluminum winding compare to copper?
A: Aluminum uses 1.6× larger conductor cross-section to achieve the same current rating. Material cost is 30–50% lower. Load loss is slightly higher (5–10%) – acceptable for most distribution projects. Copper optional.
-
Q3: What test reports are provided?
A: Routine test reports per IEC 60076: winding resistance, turns ratio, insulation dielectric, no-load loss, load loss, impedance, and tank pressure test. CE support available.
-
Q4: What is delivery time to African ports (e.g., Dar es Salaam, Tema, Mombasa)?
A: Production 30–35 days. Ocean freight 30–50 days depending on port. Export docs (CO, invoice, test reports) provided.
-
Q5: What maintenance is needed in remote areas?
A: Very low. Annual visual check of paint, oil level, and pressure relief device. Oil sampling for DGA every 2–3 years. No breather servicing, no oil top-up.
Request your quotation today – volume discounts available for African distribution projects. Email for technical datasheet and project support.
-
250kVA 10kV to 0.4kV Oil-Immersed Distribution Power Transformer for Rural Electrification
Factory Price S11 250kVA 10kV to 0.4kV Distribution Power Transformer for Rural Electrification Product Overview The Factory Price S11-250kVA 10kV to 0.4kV Distribution Power Transformer is a high-performance, three-phase oil-immersed unit specifically engineered for rural electrification and agricultural power grids . As an industry-standard step-down transformer, the S11 series balances cost-efficiency with exceptional reliability. Whether for remote village power supply,
-
IEC60076 High Efficiency 630kVA 10/0.4 Copper Winding Oil-Immersed Transformer With oil Conservator For Residential Electrical Applications Manufacturer
หม้อแปลงน้ำมัน IEC60076 630kVA พร้อมขดลวดทองแดงและการระบายความร้อน ONAN การออกแบบป้องกันการรั่วไหลประสิทธิภาพสูงสำหรับสภาพแวดล้อมที่รุนแรง ตัวเลือกที่ปรับแต่งได้ รับประกัน 1 ปี พลังงานที่เชื่อถือได้สำหรับการใช้งานในที่พักอาศัยและเชิงพาณิชย์
-
Reliable 315kva transformer price Oil Immersed Distribution Transformer with Dust Resistant Sealing for African Conditions
หม้อแปลงแช่น้ำมันขนาด 315kVA พร้อมซีลกันฝุ่นสำหรับสภาวะในแอฟริกา นำเสนอการสูญเสียต่ำ (480W ขณะไม่โหลด) ได้รับการรับรอง IEC/CE และการป้องกันการกัดกร่อนที่ได้รับการปรับปรุงสำหรับสภาพแวดล้อมที่รุนแรง
