Corrosion resistant medium power transformer 600kVA 800kVA 1000kVA 11kV 0.433kV oil immersed for Africa coastal humidity and outdoor harsh climate
Transformateur immergé dans l'huile de 600 kVA à 1 000 kVA résistant à la corrosion pour les environnements côtiers et à forte humidité. Comprend un réservoir scellé, des enroulements en cuivre et une distribution d'énergie stable de 11 kV/0,433 kV.
0.433kV Oil Immersed Medium Power Transformer
,11kV Oil Immersed Medium Power Transformer
,1000kVA Medium Power Transformer
Product Overview
The 600kVA / 800kVA / 1000kVA corrosion-resistant oil-immersed transformer is designed for medium-power distribution in environments with coastal humidity, salt spray exposure, and outdoor climate challenges.
Built with a reinforced tank structure, protective surface coating, and copper winding system, this transformer supports stable voltage output, reduced loss, and long-term operational reliability.
It is well-suited for coastal regions, ports, island power systems, industrial zones, and outdoor installations where corrosion resistance and environmental durability are essential.
Corrosion-Resistant Tank Design
Anti-corrosion coating and reinforced steel tank support long-term use in coastal and high-humidity environments.
Sealed Structure for Moisture Protection
Sealed oil tank construction helps limit moisture ingress and supports internal insulation stability.
Copper Winding Configuration
High-conductivity copper windings improve load handling capability and thermal stability.
Low-Loss Core Performance
Grain-oriented silicon steel core reduces energy loss and supports efficient operation.
Outdoor Durability
Designed for continuous outdoor use under salt spray, humidity, and temperature variation.
| Parameter | Specification |
|---|---|
| Rated Capacity | 600 / 800 / 1000 kVA |
| Primary Voltage | 11 kV |
| Secondary Voltage | 0.433 kV |
| Phase | Three Phase |
| Frequency | 50 Hz / 60 Hz |
| Cooling Method | ONAN |
| Core Material | Cold-rolled silicon steel |
| Winding Material | Copper |
| Insulation Class | A / F |
| Tap Changer | Off-circuit |
| Tap Range | ±2×2.5% |
| Insulating Medium | Mineral oil |
| Tank Type | Sealed Type |
| Installation | Outdoor / Ground mounted |
- High humidity affecting insulation performance
- Salt spray accelerating metal surface corrosion
- Outdoor exposure to wind, rain, and temperature changes
- Increased risk of moisture intrusion into equipment
- Anti-corrosion coating system for salt spray environments
- Sealed tank structure supporting moisture control
- Reinforced steel body improving structural durability
- Copper winding design supporting stable operation
- ONAN cooling system maintaining thermal balance
These features support long-term stability in coastal and high-humidity environments.
Suitable for:
- Coastal distribution networks
- Port and harbor power systems
- Island power supply
- Outdoor utility installations
- Industrial zones near coastal areas
- Community and residential distribution
- Renewable energy integration points
Q1: Is this transformer suitable for coastal environments?
Yes. The corrosion-resistant tank and protective coating are designed for salt spray and humidity exposure.
Q2: Can it operate in high-humidity conditions?
Yes. The sealed structure helps maintain internal insulation stability.
Q3: What cooling method is used?
ONAN cooling is applied for stable thermal performance.
Q4: Can voltage adjustment be configured?
Yes. Tap changer options are available for voltage adjustment.
Q5: What is the warranty and after-sales support in Africa?
A: 24-month standard warranty. We have authoriz
