Durable 37.5 kVA Single Phase Pad Mounted Distribution Transformer for Outdoor Power Distribution
Eenfasige, op een pad gemonteerde transformator van 37,5 kVA voor stroomdistributie buitenshuis. Voorzien van koperen wikkelingen, robuuste weerbestendige constructie, manipulatiebestendige behuizing en flexibele spanningsaftakkingen. Voldoet aan de IEC60076-normen, ideaal voor elektrificatieprojecten in woningen en op het platteland.
This 37.5 kVA single phase pad mounted distribution transformer is purpose-built for safe and long-lasting outdoor power distribution. It steps down medium voltage to usable low voltage for residential subdivisions, small commercial loads, and rural electrification projects. The unit is fully enclosed within a lockable, tamper-resistant steel cabinet, making it suitable for ground level installation without the need for protective fencing. Every transformer undergoes rigorous testing to guarantee operational security and energy efficiency, especially in the diverse and demanding environments found across Latin America.
- Robust weatherproof construction crafted for enduring outdoor exposure in tropical heat, heavy rain, and coastal salt spray
- High energy efficiency design reduces operational losses and lowers lifetime energy costs for utilities and end users
- Enhanced security cabinet with concealed hinges, tamper-resistant fasteners, and fully lockable door to prevent unauthorized access and vandalism
- Flexible voltage tappings on the primary side allow fine tuning to local grid fluctuations, ensuring stable secondary output without field modifications
- Low maintenance sealed tank structure eliminates the need for periodic oil sampling or internal inspections, significantly cutting down service visits
- Swift project deployment supported by compact footprint and lifting provisions that simplify transport and installation on unprepared rural terrain
| Rated Power | 37.5 kVA (37.5 kilovolt amperes) |
|---|---|
| Phase and Frequency | Single phase, 60 Hz (50 Hz configuration available on request for specific Latin American islands or southern cone applications) |
| High Voltage (Primary) | Commonly selected from 13.2 kV, 13.8 kV, 7.62 kV, 14.4 kV, or 19.9 kV with full capacity tapping range of ±2×2.5% to adjust to local medium voltage networks |
| Low Voltage (Secondary) | Typical output 120/240 V split phase; other combinations like 127/254 V or 220 V can be supplied to match country specific service voltages |
| Cooling and Insulation | ONAN cooling with high quality inhibited mineral oil meeting ASTM D3487, providing excellent dielectric strength and arc quenching properties; a natural ester (vegetable oil) option is available for environmentally sensitive areas |
| Temperature Rise | 65°C average winding rise over 30°C ambient, enabling reliable operation even in direct sun exposure and high temperature zones |
| Impedance | Typically 2.0% to 3.5% at 85°C, designed to limit fault currents while maintaining tight voltage regulation |
| Bushing and Terminals | Weatherproof high voltage bushing with clamp type connectors and low voltage bushings rated for outdoor use; all live parts are fully recessed and touch safe |
| Cabinet and Corrosion Protection | Heavy gauge steel enclosure with multi-stage surface preparation, including zinc rich primer, epoxy intermediate coat, and aliphatic polyurethane top coat in ANSI 70 gray or green; coating system meets ISO 12944 C4 to C5 standards for coastal and high humidity regions |
| Internal Protection | Bolted core and coil assembly with shock absorbers to withstand transport on unpaved roads; covered with single piece gasket seal to block moisture and insect ingress |
| Standards Compliance | Built and tested per IEEE C57.12.00, IEEE C57.12.28 (cabinet integrity), and NEMA TR1; documentation for local certifications (RETIE Colombia, NOM Mexico, IRAM Argentina, NBR Brazil) can be provided |
| Optional Accessories | Drain and sampling valve, pressure relief device, liquid level gauge, dial thermometer, and load break switching on the primary side can be integrated to suit utility specifications |
We fully understand the diverse operating conditions across the region and have incorporated specific technical measures into this 37.5 kVA single phase pad mounted distribution transformer. These details address real on-the-ground requirements without compromising reliability.
- Coastal and Humid Climate Corrosion Resistance: Many project sites in the Caribbean, Central America, and Brazil's coastline battle persistent salt spray and high relative humidity. We respond with a C4/C5 grade protective coating system, stainless steel door hinges, and self-draining cabinet edges that prevent water pooling. All external hardware is zinc plated or stainless steel to ensure the enclosure remains intact for decades.
- Tropicalized Insulation and Mold Prevention: In regions like the Amazon basin and the Pacific lowlands, prolonged moisture can degrade internal components. Our units use moisture-resistant kraft paper and premium insulating oil to suppress mold growth. The tank is sealed with a nitrogen blanket or air cushion that blocks ambient moisture ingress, keeping dielectric integrity high.
- Voltage Fluctuation Management: Voltage profiles in some Latin American grids can swing widely due to long rural lines or load variations. The primary winding includes wide-range taps (typically four 2.5% steps) that can be adjusted de-energized to match the exact incoming service voltage. This prevents under-voltage or over-voltage tripping at customer meters without needing on-site custom rewinding.
- Tamper and Theft Deterrence: Ground level pad mounted transformers can attract vandalism or copper theft in remote or underserved areas. We integrate tamper-resistant penta head bolts, concealed lockable cabinet entry, and a robust door mechanism that requires a specialized tool to open. This discourages unauthorized access while maintaining safety compliance.
- High Altitude and Temperature Extremes: For projects in the Andes or central Mexican highlands, we modify bushing creepage distances and adjust internal clearances to compensate for reduced air density. The cooling oil volume and thermal ratings are verified to operate at altitudes up to 2500 meters without derating. In lowland tropical zones, the 65°C temperature rise margin ensures full capacity even under 40°C ambient shade temperatures.
- Transportation and Rural Installation Readiness: Many rural electrification sites are accessible only by unpaved secondary roads. Our transformer features a reinforced base frame, robust lifting lugs, and a compact footprint that fits on a small flatbed truck. The core and coil assembly is shock mounted to survive rough handling during last-mile delivery.
Request your customized 37.5 kVA single phase pad mounted transformer quotation today and secure fast delivery to your project site in Latin America.
-
Eenfasige Pad-gemonteerde Transformator Laag Geluid 250kVA 50Hz Oliegevuld
Single Phase Pad Mounted Transformer Low Noise 25kVA 37.5kVA 50kVA 50Hz Oil Filled Product Specifications Attribute Value Type distribution transformer, power transformer, Oil-filled Transformer Frequency 50Hz, 60Hz Winding Material Aluminum Application Power Phase Single Phase Coil Structure TOROIDAL Input Voltage 3kV, 6kV, 10kV, 15kV, 35kV, 69kV, 110kV, 220kV, 400kV, 115kV, 132kV Output Voltage 5V, 400V, 208V, 200V, 415V, 127V, 11kV, 12V, 24V, 48V, 110V, 220V, 36V, 380V,
-
167 Kva Pad gemonteerde transformator variabele stap-op-af enkelfasetransformator
167 KVA Pad Mounted Transformer Variable Step Up Down Single Phase Transformer Product Specifications Attribute Value Type Distribution transformer Material Copper, 100% Copper Frequency 50Hz, 60Hz Phase Single Phase Input Voltage 3kV, 6kV, 10kV, 15kV Output Voltage 11kV, 12V, 24V, 110V, 220V, 380V, 440V, 480V Rated capacity 167KVA Cooling Method ONAN ONAF OFAF Warranty 3 Years Transformer type Oil-immersed Pad Mounted Technical Specifications Capacity: 15kVA ~ 500kVA Primary
-
Step Down Single Phase Transformer 167kVA 250kVA 500kVA Pad Mounted IP55 Protection
Step Down Single Phase Transformer 167kVA 250kVA 500kVA Pad Mounted IP55 Protection Product Overview 500kVA Voltage Step Down Transformers - Single Phase Pad Mounted Technical Specifications Attribute Value Frequency 50Hz, 60Hz, Phase Single Phase Coil Structure Round coil Output Voltage 220V, 380V, 400V, 440V, 480V Input Voltage 35kV, 6kV, 10kV Cooling Method ONAN (Oil Natural Air Natural) Warranty 2 Years Winding Material Copper / Aluminum Operating Temperature -40°C to 55
