5s
+1
Submission successful!
Place of Origin:
Jiangsu, China
Brand Name:
HENTG Power
Certification:
CE
Model Number:
S13
Video
Video
| Attribute | Value |
|---|---|
| Frequency | 60Hz |
| Phase | Three, Single Phase |
| Application | Power Transformer |
| Output Voltage | 415V, 380V, 400V, 110V, 220V, 440V, 480V |
| Input Voltage | 11kV, 10.5kV, 6.3kV, 6.6kV, 6kV, 10kV, 35kV |
| Type | Oil-Immersed Transformer |
| Cooling Method | ONAN ONAF OFAF |
| Primary Voltage | 35~38.5KV±5% |
| Standard | IEC ANSI |
| Vector Group | Yd11/YNd11 |
IEC Standard MV Transformer 33kv 35kv to 380v 415v 800 Kva 1000kva 1500kva Step up Oil Immersed Transformer
HENTG's S13 is a self-developed transformer evolved from the S11 model. Through the application of new materials and technologies, integration of independent innovation and technology introduction, as well as optimized core and coil structure design, it achieves reduced no-load loss. Its noise level averages a 20% decrease compared with the national standard JB/T10088-2004, with performance reaching the domestic advanced level.
| Capacity (KVA) | HV (KV) | HV Tapping | LV (KV) | Vector Group | No-load Loss (W) | On-load Loss (W) | No-load Current (%) | Short Circuit Impedance (%) |
|---|---|---|---|---|---|---|---|---|
| 630 | 35 | ±5% | 3.15 6.3 10.5 |
Yd11 | 830 | 7870 | 1.1 | 6.5 |
| 800 | 35 | ±5% | 3.15 6.3 10.5 |
Yd11 | 980 | 9410 | 1 | 6.5 |
| 1000 | 35 | ±5% | 3.15 6.3 10.5 |
Yd11 | 1150 | 11540 | 1 | 6.5 |
| 1250 | 35 | ±5% | 3.15 6.3 10.5 |
Yd11 | 1410 | 13940 | 0.9 | 6.5 |
| 1600 | 35 | ±5% | 3.15 6.3 10.5 |
Yd11 | 1700 | 16670 | 0.8 | 6.5 |
| 2000 | 35 | ±5% | 3.15 6.3 10.5 |
Yd11 | 2180 | 18380 | 0.7 | 6.5 |
| 2500 | 35 | ±5% | 3.15 6.3 10.5 |
Yd11 | 2560 | 19670 | 0.6 | 6.5 |
| 3150 | 35~38.5 | ±5% | 3.15 6.3 10.5 |
3040 | 23090 | 0.56 | 7 | |
| 4000 | 35~38.5 | ±5% | 3.15 6.3 10.5 |
3620 | 27360 | 0.56 | 7 | |
| 5000 | 35~38.5 | ±5% | 3.15 6.3 10.5 |
4320 | 31380 | 0.48 | 7 | |
| 6300 | 5250 | 35060 | 0.48 | 7.5 | ||||
| 8000 | 35~38.5 | ±2*2.5% | 3.15 3.3 6.3 6.6 10.5 11 |
Ynd11 | 7200 | 38480 | 0.42 | |
| 10000 | 35~38.5 | ±2*2.5% | 3.15 3.3 6.3 6.6 10.5 11 |
Ynd11 | 8700 | 45320 | 0.42 | |
| 12500 | 10080 | 53870 | 0.4 | 8 | ||||
| 16000 | 12160 | 65840 | 0.4 | 8 | ||||
| 20000 | 14400 | 79520 | 0.4 | 8 | ||||
| 25000 | 17020 | 94050 | 0.32 | 8 | ||||
| 31500 | 20220 | 112860 | 0.32 | 8 |
We will respond to your inquiry within 1 hour and recommend suitable transformer according to your needs. At the same time, we will provide you with reasonable quotations and payment terms. We have a professional and independent drawing team and technical team, and we will confirm all the contents on the drawing with you within 7 days after payment. The drawing usually contains technical data, weight and parts list.
After designing the production drawing, the factory will prepare the stock, produce, and conduct quality inspection before shipment. If you have special accessory requirements, we can provide you with accessories. Our raw materials are strictly screened. In the quality inspection stage, we will provide you with the dual guarantee of QC report and test report to escort your products.
We have a professional team to guide the installation, and also support on-site installation. We will provide you with more than 2 years of warranty service.
HENTG POWER is a professional designer, manufacturer and installer of power system solution around the World, was founded in 2011, occupies 100,000 square meter. specializing in reliable, high-performance solutions for global power systems.
Always a pre-production sample before mass production; Always final Inspection before shipment, We will provide QC & test reports. We accept FAT(Factory Acceptance Test). Factory can manufacture oil type and dry type distribution transformer, max 500KV 480MVA power transformer, GIS, switchgear, substation, based on ANSI/IEEE/DOE2016/CSA/IEC60076 standard. We will provide you with the guarantee service of over 2 years.
We have the professional and independent drawing team and technical team, It is expected that we can confirm all the contents on the drawings with you within 7 days. we have a professional technical team with 30+ senior engineers offer 24 hours online service and response within 30 min.
Accept OEM, business payment are negotiated.
If you have any questions, welcome to contact us for discussion!
Send your inquiry directly to us
